Friday, December 19, 2014

Tutorial To Install Stock ROM On Karbonn Titanium Octane Plus


Install Stock ROM On Karbonn Titanium Octane Plus

If you are familiar with the rooting process, you probably know that rooting and changing the ROM in android phone remove the manufacturer warranty. But if the phone already have official ROM the warranty will never void.

The official ROM for Karbonn Titanium Octane Plus smartphone is now available. At below I have given the procedure to install the stock ROM on your phone. By installing this ROM you will back to official ROM.


    First ensure the battery of your phone is above 75%, so then it will never get switched OFF during the middle of the process.

    Next take full backup of your phone.

    Also backup the important datas like SMS messages, Whatsapp messages, Contacts etc., as this would be formatted during the process.

    Next install the drivers for your phone using Karbonn Titanium Octane Plus drivers Click Here to Download

    Disclaimer : Follow the given below procedure at your own risk. I would not be held responsible for any damage that occurs to your phone, in case you do not follow the procedure properly.


1.  Official stock ROM (Karbonn_Titanium_Octane_Plus_978128_9404_KK_V031005) JB 4.4.2 :download link Click Here to Download
2.  Canvas HD Drivers : Click Here to Download
3. SP Flash Tool download link: Click Here to Download
4. A Windows PC
5. A Karbonn Titanium Octane Plus (obviously)

Procedure to install Stock ROM on Karbonn Titanium Octane Plus smartphone:

1. Next extract the Stock Rom folder


    If you want to install CWM along with official ROM, then replace recovery.img with CWM recovery (Download the updated version of CWM from this page and Learn how to install CWM in your Octane Plus on this page).

2. Extract and open the SP Flash Tools and run as administrator.

3. In SP Flash Tools, just click the “scatter loading” it will ask you the location of the scatter loading file for your phone.

4. In the extracted folder of the stock ROM, go to the folder named “www.moulnisky.com_978128_9404_kk_V009061” and select the file “MT6592_Android_scatter.txt”(it is our scatter loading file).

5. Next Switch off your phone (To make it sure just remove the battery).

6. In Flash tool, go to options and click USB mode so that it is enabled. Click options again and then go to DA, Download All>Speed and finally select High Speed.

7. Click the download option (present on the right of firmware upgrade option) and flash the tool will start looking for your phone.

8. Connect your phone now. The Flash tool will start the flashing process, you can see the progress at the bottom of the flash tool.

9. Don’t disturb the process until it get finished, otherwise it will brick your phone.

10. Once the process is finished, a green ring will appear on your phone, which implies the installation of stock firmware on your device is successful.

11. Now, disconnect your phone and enjoy.
Read more »

Thursday, December 18, 2014

How to install CWM and root your Karbonn Titanium Octane Plus

Follow these steps to root your phone.


Preparation of flash/update:

1. Take a backup of your phone.

2. Your phone battery should charge 80% minimum.

3. Read all steps then do it careful.

4. Make sure proper power backup of your PC.


1. MT6592 Scatter file(MT6592_Android_scatter.txt) Click here to download

2. SP-Tool(Flashtool.rar)  Click here to download and USB  Driver(Karbonn-Usb-Driver.rar) for Octane Plus Click here to download

3. CWM Recovery for Octane Plus(recovery.img) Click here to download

4. Root Kit -SuperSU( Click here to download

How to Root and install CWM recovery on Karbonn Titanium Octane Plus KitKat:

Step 1: Install drivers in your PC and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it . After then switch off your phone.

Step 2:  Download SuperSU file and copy in your phone memory card. Now Download CWM recovery and scatter file of your phone and extract these file in a folder where you want. Extract and open the SP Tool. Sptool.exe Run as Administrator.

Step 3: You will see an SP tool window, now click on the scatter-Loading option in the SP tool. Then you will get the new tab of SP Tool which you ask the location of the scatter file on your PC. Now select the "MT6592_Android_scatter.txt"  file.

Step 4: Now connect your switch off phone with PC via USB cable (Make sure your phone is switched off).

Step 5: SP Tool detect your phone and process will start. If Sptool is not recognize/detect your phone then install USB  Driver for Octane Plus driver.

Step 6: Now start installing recovery in your phone by flashing.

Note: - Don't interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 7:  After the process complete, a green ring will appear.

Here have successfully installed CWM Recovery  in your Karbonn Titanium Octane Plus.

Now let's start to Root your Titanium Octane Plus:

Step 8: Disconnect your phone.

Step 9: Do not start your phone. Press and hold vol. up + power button then select “recovery mode” (If your touch not work then use volume up and down key for menu up and down and Power button as a enter button)

Step 10. Click on install button/ choose install and select file from your save location on your SD card and install this file. Now  reboot your phone.

Enjoy Rooted phone.

Note: I am not responsible if you make Mistakes and Bricked Devices.

Click Here to Join Karbonn Octane Plus Facebook Group.

Read more »