Saturday, May 18, 2013

Snaps of my Canvas HD A116

Micromax Canvas HD A116 (Packaging)

Micromax Canvas HD A116 (Front)

Flip Cover and Back Cover provided in box by Micromax 

Canvas HD with Flip cover on

Flip Cover with Matte finish

USB charger


Read more »

Friday, May 17, 2013

How to update Micromax Canvas HD A116 to the official stock v4.1.2 v2 ROM

Canvas HD 4.1.2 stock ROM: Official Stock 4.1.2 v2 ROM
Canvas HD drivers download link Canvas HD a116 drivers
SP Flash Tool v3.1304.0.119 download link: SP_Flash_Tool_v3.1304.0.119
A Windows PC
A Micromax A116 (obviously)
Installation tutorial : Micromax Canvas HD Stock Version 2 Tutorial


 1. Install drivers for your phone using Micromax drivers. (x86 for 32bit OS and x64 for 64bit OS)

2. Extract the Stock ROM folder



If you want to install CWM along with official rom,then replace recovery.img with cwm recovery (Download CWM updated Version)

Note:Use recovery.img(Default) if you want tech support from micromax Service center other wise they will freeze you warranty.


3. Extract and open the SP Flash Tools.(Run As Administrator)
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.

5. In the extracted folder of the stock rom, go to the folder named “S9201_MP_F4_B1_IN_MMX_0.20__flasher_user” and select the file“MT6589_Android_scatter_emmc” which is our scatter loading file.

6. Switch off your phone (Remove the battery+ sim card+ memory card to make sure it is switched off).IMP*** Do not put your battery again,the phone should be without battery,sim card and memory card while flashing process completes.

7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed. *IMP

8. Click the Firmware Upgrade option on the left of Download option and the flash tool will start looking for your phone.

9. ***Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.

**Don’t interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).

10. After the process completes, a green ring will appear on your device signalling that the process was successful.

11.Disconnect your phone.

***I have succesfully flashed my canvas HD using above process,if u brick ur phone i'll not be responsible and flash at your own risk!!!

Read more »